|
|||||||||||||||||||||
| |
|||||||||||||||||||||
|
Home > Networking > Wireless Network
> Product Information
Outdoor Wireless Access Point Bridge Hot Spot 802.11a/b/g 5610
Extend Your Wireless Network Range
with this Outdoor Hot Spot!
Extend your wireless network range with this EnGenius EOC-5610 Business Class Outdoor Wireless 802.11a/b/g Access Point/Client Bridge/Client Router with embedded 13dbi(802.11a) and 5dBi(802.11b/g) Wireless Directional Patch Antenna and RP-SMA Connectors for an optional External Antenna. This device is a 5GHz(80-2.11a) and 2.4GHz(802.11b/g) Dual Band High Power (600mW maximum) Wireless Radio Access Point and Client Bridge with Embedded 13dBi(802.11a) and 5dBi(8-002.11b/g) panel antenna and External Connector for optional Directional or Omni-directional Antenna. External antennas can provide increased range and and receive sensitivity. Also included is a Power Over Ethernet (PoE) device to meet your need for cable distance from the inside of your building to the device's outside installation (up to 300 feet or 90 meters). The device in a weatherproof enclosure offers a cost-effective solution as a Backhaul device to create Point-to-Point and Point to Multi-Point solutions. This business class device is a Long Range outdoor wireless Access Point / Client Bridge / Client Router that operates seamlessly in the 5GHz and 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with SuperG (802.11g) (Note: to operate at Super-G speeds the associated device must be capable of SuperG operation). It features high transmit output power (up to 600mW) and high receive sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points and to deliver a more stable wireless connection. It also reduces deployment expenses on the equipment. It supports distance control and can transmit a signal up to 5 miles (8km) and the RSSI indicator, which enable the best transmit and receive signals for superior wireless performance (distance covered is line-of-sight with external directional antennas and is affected by obstructions and terrain and devices used in-between sending and receiving sites). This outdoor device comes with a PoE injector (24V) for easy outdoor deployment and the Power Adapter accepts 100-240VAC input which allows it to work anywhere in the world. To use it outside of North America all you will need is a plug adapter that allows you to plug a standard USA type plug into your country's electrical mains. To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filtering lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users. This is a feature-rich and all-in-one outdoor device, it is the perfect solution for any outdoor application you may have. And if you want to create specialized software the device is compatible with DD-WRT porting software. Set up or extend your wireless network with this outdoor 802.11a/b/g compliant broadband access point and client bridge. It features an all-weather case for setting up outdoor your hotspot. Operating in the 5GHz (802.11a) band allows you to avoid interference from 802.11b/g network devices. Note: to use the 802.11a band you require wireless devices that are capable of operating on the 802.11a band. The 2.4 GHz wireless frequency and 54 Mbps wireless transfer speed gives you the latest in wireless technology. It's also compatible with older 802.11b specifications. The unit includes a protected Ethernet connection to prevent water damage outdoors. The broadband router and access point/client bridge signals are boosted by a built-in 13dBi (802.11a / 5 dBi (802.11b/g) patch antenna or you can connect an external directional or omni-directional antenna (external antenna not included). You can set-up your own high-speed wireless hotspot anywhere today. You can mount the device on a pole with the supplied mounting hardware. You just need to connect the router/access point to a DSL/Cable modem or switch to access the internet. Standard CAT-5 or CAT-6, 8-conductor Ethernet cable is required (which should not exceed 300 feet or 90 meters) is not included. A Pole Mounting strap and Wall Mounting screws with plastic sleeve anchors are included in the package. This device increases the effective range and coverage area of a 802.11a or b or g network. When used with other 802.11a devices (or as a Backhaul device with the EnGenius EOR-7550) you can create a powerful and effective point-to-point or point-to-multi-point network. This unit is Brand New and comes with an EnGenius 12-month limited warranty and we provide free on-line email technical support NOTE: A User Manual is supplied on the CD which explains the setup and settings for the configuration wizard built into the unit. Please be certain that you have a good working knowledge and experience in network setup before you attempt to make changes and setup this unit. If not please seek the assistance of an experienced network consultant. We can not guarantee the actual distance performance of this device. Your actual results can vary greatly from the device specifications and are dependant on many variables including, but not limited to, physical installation, signal quality, signal strength of feed, other components in the system, type and quality of receiving devices, and other components in a point-to-point or point-to-multi-point system.
~~~~ We ship WORLDWIDE ~~~~
Applications
International Buyers - see note below¹
Insurance is required on all shipments and is included in the shipping costs.
**This rate does not apply to: Bosnia-Herzegovina, Bulgaria, Croatia, Montenegro, Poland,
EnGenius Outdoor Wireless LAN 802.11a/b/g Access Point/Client Bridge
> Atheros AR2313 & AR5112 Chipset > Physical Interface One 10/100 Fast Ethernet RJ-45 > Reset Button > Two External RP-SMA Connectors and a switch (external and internal antenna switching) > LED indicators: Power/ Status, LAN (10/100Mbps), WLAN (Wireless is up) > Link Quality LEDs: 3 (Client Bridge mode); Green: Good Quality, Yellow: Marginally Acceptable Quality, Red: Bad Quality > Power Requirements: Active Ethernet (Power over Ethernet) Proprietary PoE design-Power Adapter 24 V 0.8A DC > Regulation Certifications FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17 > Modulation Technology OFDM: BPSK, QPSK, 16-QAM, 64-QAM and DSSS: DBPSK, DQPSK, CCK > Operating Channels 802.11b/g-11 for North America, 14 for Japan, 13 for Europe > Receive Sensitivity (Typical): 802.11a: -92dBm at 6Mbps, -73dBm at 54Mbps 802.11g; -92dBm at 6Mbps, -75dBm at 54Mbp 802.11b; -97 dBm at 1Mbps, -91dBm at 11Mbps > Available transmit power (Average power) 802.11a: 26dBm at 6~24Mbps, 24dBm at 36Mbps, 22dBm at 48Mbps, 20dBm at 54Mbps 802.11g: 26dBm at 6~24Mbps, 24dBm at 36Mbps, 23dBm at 48Mbps, 22dBm at 54Mbps 802.11b: 27dBm at 1~11Mbps Software Features: > Topology - Infrastructure > Protocol/Standards: IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.11b/g (2.4GHz WLAN) > Operation Mode 802.11 a/b/g: Access Point, Client Bridge, Client Router > LAN - DHCP Server & DHCP Client > VPN - pass through > Wireless Channel Selection (Setting varies by countries) > Transmission Rate: 11 a/b/g 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps > Long distance transmission: helpful in restricting the coverage area of the wireless network > Transmit power table > Signal Strength indication using LEDs > PPPoE (CR mode) > Preferred SSID > Security: WEP Encryption-64/128/152 bit WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) 802.1x Authenticator Hide SSID in beacons Wireless STA (Client) connected list MAC Address filtering, up to 50 field > QoS - WMM > Configuration - Web-based configuration (HTTP) > Firmware Upgrade - Upgrade firmware via web-browser Keep latest setting when firmware is updated > Administrator Setting - Administrator password change > Reset Setting - Reboot (Press 1 second) & Reset to Factory Default (Press 5 seconds) > System monitoring - Status, Event Log > SNMP V1, V2c (Phase 2) > MIB - MIB I, MIB II (RFC1213) and Private MIB > Backup & Restore Settings through Web > Time setting NTP (Auto-setting of time) & Time setting manually > DD-WRT software compatible > Humidity (non-condensing) 0-90% typical > Dimensions: 10.24 x 3.31 x 2.17-inches / 260 x 84 x 55-mm (approximate L x W x H) > Agency approvals; FCC, EC, RoHS, UL (Power Adapter) Here's what's in the box
~~~ We ship WORLDWIDE ~~~
Store Policies Payment We accept Pay-Pal, Visa, MasterCard, Discover Card, Money-Order, Cashiers Check or Personal Checks written on U.S. banks. We can only directly accept credit cards issued by banks in the U.S.A. On personal checks allow 10-business days after receipt for the check to clear. We guarantee the item to be as described and will refund the purchase price if it is not as described and it is returned unopened and unused within 7 days of receipt. Please see the RMA Policy below. On shipments outside the USA, import costs, duty and taxes (if required) are paid by the buyer. Sales tax is added to any item shipped to an address in California. Shipping We usually ship within 48 hours from receipt of payment. We use the most economical shipping methods available. You can select other shipping methods. Shipping and handling costs are listed for a single item in the Shipping Costs table in the middle of this listing. All items are shipped insured with the insurance fee added when you process your order at checkout. We will supply you with tracking numbers where available from the carrier. Unfortunately carriers sometimes take longer than their published transit time and this is beyond our control. If you purchase two (2) or more items from us in a
48-hour period, we will ship all items in one package. This usually provides a shipping and handling discount of approximately 10% per item (if shipping costs were figured individually for each item). Shipping charges are calculated for most countries. Shipping charges for other Worldwide areas quoted as required. We take great care in accurately describing the condition of the products we sell. We get our merchandise from reputable suppliers, but if you receive an item and feel that the condition is not consistent with our description or if it is DOA, let us know immediately (within 7 days of receipt), and we'll do our best to satisfy you. If we can't make you happy you may return the item but will require an RMA as described below. This item has a Limited Warranty as defined in the listing. We guarantee the item to be as described and will refund the purchase price if item is not as described and buyer returns it unused and unopened within 7 days of receipt. Please note that any item purchased and used (even once) is not returnable if the item is not defective.. If you need to return an item, please email us to obtain a Return Merchandise Authorization (RMA) number. This will help us process your claim quickly. Return shipping charges and insurance are your responsibility. You should fully insure the item you return. Returned items must include all the original packing materials and all the documentation that came with the item, or they may be subject to a 15% re-stocking charge. Returned items that operate in accordance with specifications in this listing are subject to a 15% re-stocking charge.
Additional Items
|
|
|||||||||||||||||||