Home > Networking > Wireless Network > Product Information
EnGenius ENH200 Outdoor 500mW Access Point Client Bridge WDS 802.11b/g/N
Outdoor Wireless-N Access Point
Create your own Hot Spot and extend your wireless network range with this EnGenius ENH200 802.11n Long-Range Outdoor Wireless Client Bridge/ Access Point / Client Router / Wireless Distribution System Bridge (WDS) that operates in the 2.4GHz frequency spectrum and provides high wireless data rates up to 150Mbps (which is 3 times as fast as wireless-G). The ENH200 features high transmitted output power (up to 500mW), high receive sensitivity and a built-in 10dBI Wi-Fi Dual Polarization Directional Antenna. The high power allows you to extend wireless range coverage. The dual polarity directional antenna allows you to choose the best orientation to avoid interference, thus maximizing performance and stability. Advanced features include power level control, narrow bandwidth selection, traffic shaping, and real-time high output power and sensitivity to extend range and coverage to reduce the roaming between Access Points and to deliver a more stable wireless connection. It also reduces deployment expenses on the equipment. It supports distance control and can transmit a signal up to 3 miles (4.8 Km) and the RSSI indicator, which enables configuration to receive the best signals for superior wireless performance (distance covered is line-of-sight with directional antennas and assumes proper installation and no obstructions and flat terrain in between sending and receiving sites). With a built-in secondary LAN port (RJ-45), you can attach an IP Camera to create an outdoor wireless surveillance system. This outdoor device comes with a PoE injector (24V) for easy outdoor deployment (cable distance from the inside of your building to the device's outside installation - up to 300 feet or 90 meters) and the Power Adapter accepts 100-240VAC input which allows it to work anywhere in the world. To use it outside of North America all you will need is a plug adapter that allows you to plug a standard USA type plug into your country's electrical mains. The device housed in an IP55 weatherproof enclosure to protect against rain and moisture. The ENH200 offers a cost-effective solution for a Hotspot to create Point-to-Point, Point-to-Multipoint, CPE and Outdoor IP Security Camera system solutions.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128/152-bit WEP data encryption and also supports WPA/WPA2 (both personal and enterprise). The MAC address filtering lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users. This is a feature-rich and all-in-one outdoor device, it is the perfect solution for any outdoor application you may have. The unit includes a protected Ethernet connection to prevent water damage outdoors. You can set-up your own high-speed wireless hotspot anywhere today. You can mount the device on a pole with the supplied mounting hardware. You just need to connect the access point to a DSL/Cable modem, router or switch to access the internet. In the client bridge mode, you can connect it directly to your computer or a router (to distribute the Internet signal to your LAN. Standard CAT-5 8-conductor Ethernet cable is required (which should not exceed 300 feet or 90 meters) is not included. A Pole Mounting strap and Wall Mounting screws with plastic sleeve anchors are included in the package. This device increases the effective range and coverage area of a 802.11b/g pr N network. This unit is Brand New and comes with an EnGenius 12-month limited warranty and we provide free on-line email technical support. Click here to send us an email request for PDF diagrams showing how the ENH200 can be configured as an Access Point or Client Bridge or a Point-to-Point system.
EnGenius Outdoor Wireless LAN 802.11N Access Point/Client Bridge/Router
» Physical Interface One 10/100 Fast Ethernet RJ-45 and secondary LAN (RJ-45) port
» Reset Button
» LED indicators: Power/ Status, LAN (10/100Mbps), WLAN (Wireless is up)
» Link Quality LEDs: 3 (Client Bridge mode); Green: Good Quality, Yellow: Marginally Acceptable Quality, Red: Bad Quality
» Power Requirements: Active Ethernet (Power over Ethernet) Proprietary PoE design-Power Adapter 24 V/0.6A DC
» Regulation Certifications FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17
» Receive Sensitivity:
802.11N -95dBm to -73 dBm
802.11g -96dBm to -75dBm
802.11b -97dBm to -89dBm
» Available transmit power (Average power)
802.11N 26dBm to 21 dBm
802.11g 26dBm to 22dBm
» Protocol/Standards: IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.11b/g (2.4GHz WLAN)
» Operation Mode 802.11 b/g/N: Access Point, Client Bridge, Client Router, WDS AP/CB
» LAN - DHCP Server & DHCP Client
» VPN - pass through
» Wireless Channel Selection (Setting varies by countries)
» Transmission Rate: 11 b/g 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps (SuperG 108Mbps)
» Long distance transmission: helpful in restricting the coverage area of the wireless network
» Transmit power table
» Signal Strength indication using LEDs
» Narrow Bandwidth Support: 5/10/20MHz
» PING and Trace Route Functions
» PPPoE (CR mode); MSSID Support; VLAN Support
WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
Wireless STA (Client) connected list
MAC address filtering, up to 50 fields
» QoS - WMM
» Configuration - Web-based configuration (HTTP)
» Firmware Upgrade - Upgrade firmware via web-browser
» Administrator Setting - Administrator password change
» Reset Setting - Reboot (Press 1 second) & Reset to Factory Default (Press 5 seconds)
» System monitoring - Status, Event Log
» SNMP V1, V2c (Phase 2)
» MIB - MIB I, MIB II (RFC1213) and Private MIB
» Backup & Restore Settings through Web
» Time setting NTP (Auto-setting of time) & Time setting manually
» Setup instructions for Windows 2000, XP, Vista, 7 and Macintosh (MAC)
» Humidity (non-condensing) 0-90% typical
» Dimensions: 10.24 x 3.31 x 2.17-inches / 260 x 84 x 55-mm (approximate L x W x H)
» Agency approvals; FCC, EC, IC, RoHS, UL (Power Adapter)
Here's what's in the box
NOTE: A User Manual is supplied on the CD which explains the setup and settings for the configuration wizard built into the unit. Please be certain that you have a good working knowledge and experience in network setup before you attempt to make changes and setup this unit. If not please seek the assistance of an experienced network consultant. We can not guarantee the actual distance performance of this device. Your actual results can vary greatly from the device specifications and are dependant on many variables including, but not limited to, physical installation, signal quality, signal strength of feed, other components in the system, type and quality of receiving devices, and other components in a point-to-point or point-to-multi-point system.
We accept Pay-Pal, Visa, MasterCard, Discover Card, American Express, Money-Order, Cashiers Check or Personal Checks written on U.S. banks. We can only directly accept credit cards issued by banks in the U.S.A. On personal checks allow 10-business days after receipt for the check to clear. We guarantee the item to be as described and will refund the purchase price if it is not as described and it is returned unopened and unused within 7 days of receipt. Please see the RMA Policy below. On shipments outside the USA, import costs, duty and taxes (if required) are paid by the buyer. Sales tax is added to any item shipped to an address in California.
We usually ship within 48 hours from receipt of payment. We use the most economical shipping methods available. You can select other shipping methods. Shipping and handling costs are listed for a single item in the Shipping Costs table in the middle of this listing. All items are shipped insured with the insurance fee added when you process your order at checkout. We will supply you with tracking numbers where available from the carrier. Unfortunately carriers sometimes take longer than their published transit time and this is beyond our control.
If you purchase two (2) or more items from us in a
48-hour period, we will ship all items in one package. This usually provides a shipping and handling discount of approximately 10% per item (if shipping costs were figured individually for each item). Shipping charges are calculated for most countries. Shipping charges for other Worldwide areas quoted as required.
We take great care in accurately describing the condition of the products we sell. We get our merchandise from reputable suppliers, but if you receive an item and feel that the condition is not consistent with our description or if it is DOA, let us know immediately (within 7 days of receipt), and we'll do our best to satisfy you. If we can't make you happy you may return the item but will require an RMA as described below.
This item has a Limited Warranty as defined in the listing. We guarantee the item to be as described and will refund the purchase price if item is not as described and buyer returns it unused and unopened within 7 days of receipt. Please note that any item purchased and used (even once) is not returnable if the item is not defective..
If you need to return an item, please email us to obtain a Return Merchandise Authorization (RMA) number. This will help us process your claim quickly. Return shipping charges and insurance are your responsibility. You should fully insure the item you return. Returned items must include all the original packing materials and all the documentation that came with the item, or they may be subject to a 15% re-stocking charge. Returned items that operate in accordance with specifications in this listing are subject to a 15% re-stocking charge.